Correction of errors repair

Repair of apartments with their own hands is troublesome and responsible. For those who still decided to bring home the beauty of yourself, a few tips on how to avoid typical mistakes. Today, in our attention – the paint job.

Any painting work requires care and accuracy. Slightly breaking technology means trouble.

The paint will fall unevenly or, worse, depart from the wall. Let’s look at the causes of defects and ways of their elimination.

In the coloring of lime and adhesive compositions

Problem: otslaivanie

Why

Exfoliation of the paint film composition was too thick: multiple was applied at the same place: in the too much glue; painted on top of a thick layer of previously applied paint; the putty was weak.

What to do

Using the brush carefully shade failed with water, trying to wash away at least part of anew. If this does not help, it is necessary to clean off Nabel, surface grind, primed and re-painted.

Problem: translucence

Why

Translucence of the previous paint layer if the primer was different in color from the coloring composition or the layer of paint was too transparent.

What to do

Will have to paint again. If it does not give the desired effect, must again be primed using a tinted primer.

Fix error repair. Part 2

P
problem: complete or partial exfoliation of

Why

Flaking near the eaves or the top of the walls means that the wallcovering is produced on the surfaces earlier painted by glutinous or limy paints. May have been used a liquid paste or in the room had a high temperature.

What to do

When correcting pre-remove old paint, cover the surface with glue, smear Wallpaper paste is more dense and as a softening of the Wallpaper paste and carefully smooth them.

Problem: the Wallpaper behind the architraves and skirting boards

Why

Wallpapers and places of gluing were badly missed paste.

What to do

Wallpaper folded twice to thoroughly coat with the paste, the surface of the walls also the adhesive plaster and the Wallpaper will soften, stick to them.

Problem: thickened seams

Why

Sticker new Wallpaper seams coincide with the seams of the old Wallpaper that had not been cleared.

What to do

Glue again, cleaning the seams.

Problem: the visible line of stitches

Why

Means edge directed against the light.

What to do

Re-stick again, starting to work from the window.

Problem: bubbles and wrinkles

Why

Bubbles and wrinkles in the Wallpaper are formed when thin Wallpapers use too thick a glue, when the Wallpaper dries too slowly, when they casually smooth and when the Wallpaper glue before they will soften from the paste.

What to do

Will only plywood.

Problem: the Wallpaper in the corners of the walls broken

Why

Obviously the corner of the room was blocked by a piece, while smearing with paste it is somewhat stretched, and when dry the size of it has decreased.

What to do

Perekleit Wallpaper so that the corner overlaps the edge of the Wallpaper from 1.5 to 3 inches.

 

Leave a Reply

Your email address will not be published. Required fields are marked *